Passive holder with tilt swivel

Passive holder with tilt swivel

EAN: 7320287112955
Cikkszám: 711295
szélesség: 70-83 mm, vastagság: 2-10 mm.
Bruttó ár:  15 240.-HUF
Mennyiség:
1
Összehasonlítás:

Az alábbiakkal kompatibilis

Samsung Galaxy S22 Ultra
Samsung Galaxy S22 Ultra 5G (SM-S908B/SM-S908B/DS)

Telepítési útmutató

install-image-1
1. ábra
install-image-2
2. ábra
install-image-3
3. ábra
install-image-4
4. ábra
Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. To adjust the holder for your device: Loosen the screws on the front side of the holder, so the sides of the holders can be adjusted. Pull out the sides until maximum width. Place the device in the holder and press the sides together so the device is firmly in place. Gently remove the device without altering the position of the sides. Tighten the screws on the front side of the holder to lock the sides into correct position.
 
2.To install the holder:  Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

3. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.  Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw so the holder is firmly in place, but still can be adjusted.
 
4. The holder is in place.

Termékinformáció

Adjustable holder. Fits devices with skin that has the following dimensions: Width: 70-83 mm, Thickness: 2-10 mm.
Keep your phone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The adjustable holder fits for devices with and without skin with the following dimensions: Width: 70-83 mm, Thickness: 2-10 mm. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product.   Before using the holder you set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.  You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.   The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Color: black. Made in Sweden. Attach onto a ProClip mounting platform.