Kihagyás, és ugrás a termékadatokra
1 / 4

511698 - Passzív tartó csuklóval

511698 - Passzív tartó csuklóval

Állítható tartó tokkal rendelkező készülékhez. 75–89 mm széles, 6–10 mm vastag.

Normál ár 15.240 Ft
Normál ár Akciós ár 15.240 Ft
Akciós Elfogyott

Tartsa készülékét egy passzív tartóban és mindig könnyen látható és elérhető helyen lesz. Biztonságos és kényelmes! A tartó letisztult formával rendelkezik, ami harmonikusan illeszkedik a jármű utasteréhez. Készülékét biztonságosan tartja a tartó és a függőleges pozícióban optimális lesz a mobil vétel. Csatlakoztathat egy kábelt és egy fülhallgatót készülékéhez, amikor a tartóba helyezi.   A megfelelő tok kiválasztása érdekében: Mérje le a tokot és hasonlítsa össze a méretekkel az összes tartóhoz. A tartó használáshoz először állítsa be a szélességet a tokjához, majd ezután könnyen a tartóba helyezheti készülékét.   Szabvány méretű tokokra illeszkedik. A tartóba minden olyan készülék betehető, amely tokkal együtti szélessége 75-89 mm és a vastagsága 6-10 mm. (Alkalmas lehet 10mm-nél vastagabb tokokra is, az alaktól és az élek kialakításától függően.)   Fekete ABS műanyagból készül. Könnyű betenni a készüléket a tartóba illetve kivenni és magunkkal vinni, amikor elhagyjuk a járművet. A tartó csuklóval van felszerelve, így állíthatósága miatt elkerülhetjük a fényvisszaverődést. ProClipre szereljük fel.

  • Egy éves garancia
Minden részlet megtekintése

TOVÁBBI INFORMÁCIÓK

Összecsukható tartalom

Beszerelés lépései

alternatetext alternatetext alternatetext alternatetext

Please read all of the instructions and  look at the pictures before attaching the holder.

1. To adjust the holder for your device: Loosen the screws on the front side of the holder, so the sides of the holders can be adjusted. Place the device in the holder and press the sides together so the device is firmly in place. Tighten the screws on the front side of the holder.

2.To install the holder:  Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.  

3. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.

4. The holder is in place.

Kompatibilis modellek

  • Apple iPhone 12
  • Apple iPhone 12 Pro
  • Apple iPhone 12 Pro Max
  • Apple iPhone 13
  • Apple iPhone 13 Pro
  • Apple iPhone 13 Pro Max
  • Apple iPhone 14
  • Apple iPhone 14 Plus
  • Apple iPhone 14 Pro Max
  • Apple iPhone 15 Plus
  • Apple iPhone 15 Pro Max
  • Apple iPhone 16 Plus
  • Apple iPhone 16 Pro Max
  • Apple iPhone 17 Pro Max
  • Apple iPhone 18 Pro Max
  • Apple iPhone 6 Plus
  • Apple iPhone 6S Plus
  • Apple iPhone 7 Plus
  • Apple iPhone 8 Plus
  • Apple iPhone X
  • Apple iPhone Xs
  • Apple iPhone Xs Max
  • Universal

Ne felejtse el a járművéhez tartozó Proclipet sem: