712463 - Aktív tartó szivargyújtóval
712463 - Aktív tartó szivargyújtóval
With tilt swivel. 5,4A charging. 12/24V. With Easy-switching system. Charging via pogo pins. For device with Honeywell original Protective Boot (CT70-PB-GRY), with/without handstrap, with/without extended battery.
Normál ár
83.800 Ft
Normál ár
Akciós ár
83.800 Ft
Egységár
/
The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
The holder is compatible with the following original Honeywell accessorie.
Honeywell original Protective Boot: CT70-PB-GRY
Honeywell Extended Battery: CT70-BTEC-001 (The holders fit both extended battery and standard battery)
Honeywell Handstrap: CT45-HS-FM och CT40-HS-3PKC
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting platform.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
The holder is compatible with the following original Honeywell accessorie.
Honeywell original Protective Boot: CT70-PB-GRY
Honeywell Extended Battery: CT70-BTEC-001 (The holders fit both extended battery and standard battery)
Honeywell Handstrap: CT45-HS-FM och CT40-HS-3PKC
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting platform.
Egy éves garancia
Beszerelés lépései
Kompatibilis modellek
- Honeywell CT70
Töltési specifikáció
Bemeneti feszültség: DC/10-30V Töltési feszültség: 5.4V TÖLTÉS: DC/4.75-5.4V Kimeneti áram (Typ): 2.7A Bemeneti és kimeneti védelem: Bemeneti polaritás megfordítása / kimeneti túlfeszültség / kimeneti túláram / kimeneti rövidzárlatvédelem LED-es töltésjelző: Tápfeszültség bemeneti jelző (zöld), Ovp/Ocp/Kimeneti rövidzárlat (piros). Működési hőmérséklet: 0°C ~ +40°C Tárolási hőmérséklet: -20°C ~ +80°C RoHS-konform: ROHS