Weboldalunkon cookie-kat használunk, melynek célja, hogy teljesebb szolgáltatást nyújtsunk látogatóink részére. Adatkezelési tájékoztatónkat itt olvashatja.
Összehasonlítás
(0)
Terméket hozzáadtuk a kosárhoz.
Cikkszám:
Mennyiség: darab
Gross price: .-HUF
Kiválasztott:
Válasszon eszköztartót a konzolhoz!Válasszon konzolt az eszköztartóhoz!
A termék hozzáadva az összehasonlításhoz
A kiválasztott termék hozzá lett adva az összehasonlításhoz. Kérjük, válasszon még egyet.
A kiválasztott termék hozzá lett adva az összehasonlításhoz. Most összehasonlíthatja a termékeket.
Mielőtt elkezdené a telepítést, kérjük, olvassa el a használati útmutatót és tekintse át a képeket.
1. Lazítsa meg a tartó közepén a csavart, így eltávolíthatja a csukló hátsó részét.
2. Helyezze a csukló talp részét a kívánt helyre. Ezután rögzítse a mellékelt csavarokkal.
3. Helyezze a tartót a talp fölé úgy, hogy az illeszkedjen a csuklóval. Húzza meg a csavarokat, amíg a tartó szorosan a helyére nem kerül, de ez később még állítható.
With USB-cable with cig-plug adapter. With tilt swivel. 2,1A charging. 12/24V.
Use an active holder for your Dell Venue 8 Pro while driving and you will always have a freshly charged battery! Neat, discreet and convenient. Custom made with a perfect, firm fit. With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12V socket. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Mounting plate 42x50 mm. Made of high grade black ABS/Acetal plastic. Made in Sweden.
Important note!
In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
Dimensions: 150 x 173 x 45 mm (W x H x D mm)
Weight: 257 g
Cable length (+connector with plug 85 mm): 145 cm
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices like mobile phones and GPS devices. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.