Weboldalunkon cookie-kat használunk, melynek célja, hogy teljesebb szolgáltatást nyújtsunk látogatóink részére. Adatkezelési tájékoztatónkat itt olvashatja.
Összehasonlítás
(0)
Terméket hozzáadtuk a kosárhoz.
Cikkszám:
Mennyiség: darab
Gross price: .-HUF
Kiválasztott:
Válasszon eszköztartót a konzolhoz!Válasszon konzolt az eszköztartóhoz!
A termék hozzáadva az összehasonlításhoz
A kiválasztott termék hozzá lett adva az összehasonlításhoz. Kérjük, válasszon még egyet.
A kiválasztott termék hozzá lett adva az összehasonlításhoz. Most összehasonlíthatja a termékeket.
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the holder onto the attaching plate. Tighten the screw so the holder is firmly in place, but still can be adjusted.
2. Slide the device sideways carefully into the holder. Slide the locking part sideways. Press the button to lock.
3. Use the enclosed key to open the lock. Slide the locking part sideways. Slide the device sideways out of the holder.
4. The holder is in place. Switch between portrait and landscape mode by turning the holder into desired position.
Active holder for fixed installation. With USB-cable. 2 USB ports: QC 3.0A + 2.4A. 12/24 Volt. 2A charging. With tilt swivel. 2 keys included.
This holder is to be used when you will secure your device and still have it easy accessable. Perfect for use in stores, at exhibitions and any place where you want to use your device without having it easy removable. In order to remove the tablet from the holder you need the key or a certain amount of violence is required. The holder includes a lock and two keys.
For fixed installation. The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has two USB ports: QC 3.0A + 2.4A. Connect the power cable with a 2A fuse. Professional installation recommended.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden.
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on a Pedestal mount or a Brodit headrest mount.
